Step 3: Install the ASX Dashboard Software
1
On the included USB flash drive, double-click the ÄSX Dashboard installation
file and follow the prompts to complete the installation.
You do not need to run the software yet. The installation includes a USB driver
which Windows will use when you connect the autosampler to the PC.
Step 4: Mount the Z-Drive
The Z-drive moves the probe up and down. The Z-drive is shipped detached
from the autosampler.
1
Carefully unpack the Z-drive.
2
Find the Y-axis carriage on the arm of the autosampler. The Z-drive will be
attached to this carriage.
EAR99 Technology Subject to Restrictions Contained on the Cover Page.
5