Door Curtain Installation
Put one end of the rope (No.46) through the pulley (welded to Part No. 25) and through the D-ring on
the door frame (welded on Part No.27), then pass through the upper pulley (welded on Part No.24).
Make the rope naturally sag to the ground. After folding in half, it will pass upward through the lower
pulley (welded on Part No.24). Finally, tie the rope with the last connecting buckle with a carabiner
spring buckle. Pull the folded part of the rope to open and close the door curtain.
Door Opening
Door Closing
Now your installation is completed.
11
Need help?
Do you have a question about the EWC6040DTR and is the answer not in the manual?