HDX and RTX setup:
**HDX/RTX systems can be configured with the Dakota Digital app for Apple and Android devices**
HDX and RTX Operations
•
HDX: With the ignition key already on, press and hold both switches to enter SETUP, release when instructed.
o
If using the external rocker switch, hold SW2 (II) while turning the ignition on.
o
Release the switch when SETUP is shown.
o
Left switch on display is SW1, and right switch on display is SW2
•
RTX: With the ignition off, press hold SW2 (II) while turning the ignition key on to enter SETUP
o
Release the switch when SETUP is shown.
•
BOTH: When holding for an option, release the button when the screens says "RELEASE"
•
BOTH: You may skip to whichever reading you'd like to configure below; they do not need to be done in order.
•
BOTH: After making a selection, tap a switch and select BACK to save and return to the main menu, then select
EXIT SETUP to return to normal operation.
•
BOTH: SWI (left) moves up ↑ the menu list, SWII (right) moves down ↓ the menu list
Obtaining RPM from the BIM-01-2-HLLY
•
Tap SWII (right) switch until TACH is selected. Press and hold SWII (right) switch to enter TACH menu.
•
Tap SWII (right) switch until INPUT is displayed. Press and hold SWII (right) switch to enter INPUT menu.
•
Tap SWII (right) switch until CYLINDER is displayed. Press and hold SWII (right) switch to select CYLINDER.
•
Tap SWI (left) switch until BIM is displayed. Press and hold SWII (right) switch to select BIM.
•
When INPUT is displayed again, tap until BACK is displayed, then hold the switch to exit.
Obtaining engine temperature from the BIM-01-2-HLLY
•
Tap SWII (right) switch until WATER is selected. Press and hold SWII (right) switch to enter WATER menu.
•
Tap SWII (right) switch until INPUT is displayed. Press and hold SWII (right) switch to enter INPUT menu.
•
Tap SWII (right) switch until BIM is displayed. Press and hold SWII (right) switch to select BIM.
•
When INPUT is displayed again, tap until BACK is displayed, then hold the switch to exit.
[5]
MAN #650832