Canon imagePROGRAF iPF825 Service Manual page 43

First Level Second Level
[Interface Setup] [TCP/IP](*18)
[NetWare](*18)
[AppleTalk](*18)
[Ethernet Driver](*18)
[Init. Settings](*18)
[Maintenance] [Maint. cart.]
T-1-11
Third Level Fourth Level
[Protocol](*4) [BOOTP]
[RARP]
[IP Setting](*14) [IP Address]
[Subnet Mask]
[Default G/W]
[NetWare] [On]
[Off]*
[Frame Type](*6) [Auto Detect]
[Ethernet 2]
[Ethernet 802.2]*
[Ethernet 802.3]
[Ethernet SNAP]
[Print Service](*6) [BinderyPServer]
[RPrinter]
[NDSPServer]*
[NPrinter]
[On]
[Off]*
[Auto Detect] [On]*
[Off]
[Comm.Mode](*7) [Half Duplex]*
[Full Duplex]
[Ethernet Type](*7) [10 Base-T]*
[100 Base-TX]
[Spanning Tree] [Not Use]*
[Use]
[MAC Address] 000085XXXXXX
[No]*
[Yes]
[No]
[Yes]
Chapter 1
Fifth Level
[On]
[Off]*
[On]
[Off]*
0.0.0.0 to 255.255.255.255
0.0.0.0 to 255.255.255.255
0.0.0.0 to 255.255.255.255
1-29