(1)
(2)
Attaching Ruler Work Foot QR
Attach Ruler work foot QR to the presser bar from
behind.
Tighten the thumbscrew firmly with the screwdriver.
Attaching Darning Foot PD-H
Attach darning foot PD-H or darning foot PD-H (open-toe)
to the presser bar by putting the pin on the needle clamp
screw.
(1) Pin
(2) Needle clamp screw
Tighten the thumbscrew firmly with the screwdriver.
Attaching Professional Grade Foot HP
Attach professional grade foot HP to the presser bar.
Lower the presser foot with the presser foot lifter.
Tighten the thumbscrew firmly with the screwdriver.
30