Removing And Attaching The Embroidery Foot - ELNA eXpressive 830L Instruction Book

z
x
z x
e
w

Removing and Attaching the Embroidery Foot

Remove the embroidery foot when removing the needle
plate for the maintenance, etc.
Always make sure to press the lockout key to lockout
the machine or turn the power switch off before
removing or attaching the embroidery foot.
q
To remove:
z Turn the power switch off or press the lockout key.
Raise the needle by turning the handwheel toward
you.
x Loosen the setscrew with the screwdriver and remove
the embroidery foot.
w
To attach:
z Attach the embroidery foot to the presser bar from the
left side.
x Tighten the setscrew securely with the screwdriver.
16
CAUTION:
q Lockout key
w Setscrew
w Setscrew
e Embroidery foot