Extra Wide Table - ELNA eXcellence 782 Instruction Book

1. 2.
(1)
3. (4)
4.
5.
6.
loosen
(2)
(3)
(5)
tighten

Extra Wide Table

To attach:
1. Screw the adjusting screws into the legs.
2. Peel off the backing paper from the rubber soles and
attach to the bottom of the legs.
(1) Adjusting screw
(2) Leg
(3) Rubber sole
3. Attach the 6 legs to the table top with the setscrews.
(4) Setscrew
(5) Table top
4. Remove the extension table.
5. Place the assembled table on the machine.
6. Adjust the height of the table top by turning the
adjusting screw.
To remove:
To remove the legs from the table top, you do not have to
loosen the setscrews.
Turn the leg clockwise to remove the leg from the table
top.
To attach the leg to the table top again, insert the
leg into the attachment of the leg, then turn the leg
counterclockwise until it stops.
9