Removing And Attaching The Foot Holder; Upper Feed Foot - ELNA eXcellence 760 PRO Instruction Manual

q
w
e
w
z
q
x
e
r

Removing and Attaching the Foot Holder

Always make sure to press the lockout key to lockout
the machine or turn the power switch off before
replacing the presser foot.
Removing the foot holder
Raise the needle to its highest position.
Raise the presser foot and loosen the setscrew.
Remove the foot holder.
q Presser bar
w Foot holder
e Setscrew
q
Attaching the foot holder
Attach the foot holder to the presser bar from the rear.
Tighten the thumbscrew securely with the screwdriver.
NOTE:
Lower the presser foot when loosening and tightening
the thumbscrew if it is hard to access.
e

Upper Feed Foot

Always make sure to press the lockout key to lockout
the machine or turn the power switch off before
replacing the presser foot.
w
z Raise the needle to its highest position.
q Presser foot lifter
x Loosen the setscrew.
e Foot holder
r Setscrew
14
CAUTION:
CAUTION:
Raise the presser foot lifter.
w Needle
Remove the foot holder.