Table of Contents
Advertisement
w
z
x
w
c
r
z
x
w
q
q
e
q
q
e
e
w
Presser Foot Lifter
The presser foot lifter raises and lowers the presser foot.
Raise the presser foot lifter before you thread the
machine.
Always lower the presser foot lifer when you start sewing.
q Presser foot
w Presser foot lifter
NOTE:
Tension disks open when the presser foot lifter is
raised. Raise presser foot lifter when you pass the
thread between the tension disks.
e Tension disks
Removing or Attaching the Presser Foot
CAUTION:
Turn OFF the power switch before removing or
attaching the foot.
To remove:
z Raise the presser foot lifter.
x Raise the needle to its highest position by turning the
handwheel counterclockwise.
q Needle
w Presser foot lifter
c Press the lever located on the back of the foot holder.
The presser foot will drop off.
e Presser foot
r Lever
To attach:
z Place the presser foot so that the pin on the foot is
just under the groove on the foot holder.
Lower the foot holder to lock the foot into place.
x Raise the presser foot lifter.
Make sure that the presser foot is secured.
q Presser foot
w Groove
e Pin
Presser Foot Guide Lines
The guide lines on the toe of the presser foot are marked
with two needle positions.
The left guide line is marked at the left needle position.
The right guide line is marked at the right needle position.
q Left needle position
w Right needle position
9
Advertisement
Table of Contents
