Manual Stitch Settings - ELNA eXcellence 782 Instruction Book

(1)
(2)
(−)
(−) (4.5)
(−)
(−) (3.0)
(3) (2)
(+)
(+)
(+)
(+)

Manual Stitch Settings

You can alter the stitch width, needle drop position of
the straight stitches, needle thread tension, presser foot
pressure value and stitch length.
Turn the stitch width or length adjusting dial, or press the
"+" or "–" key to change the setting. Press the default key
to recover the original stitch setting.
When you press the setting bar, the manual setting
window expands to show more options.
You can alter other settings such as needle thread
tension and presser foot pressure value, depending on
the selected stitch pattern.
Press the setting bar again to shrink the manual setting
window.
(1) Setting bar
(2) Manual setting window
(3) Default key
Altering needle drop position (straight stitches)
Turn the stitch width adjusting dial clockwise to move the
needle drop position to the right.
Turn the stitch width adjusting dial counterclockwise to
move the needle drop position to the left.
You can also change the setting with the "+" or "–" key.
Press the "+" key to move the needle drop position to the
right.
Press the "–" key to move the needle drop position to the
left.
Altering stitch width
Turn the stitch width adjusting dial clockwise to increase
the stitch width.
Turn the stitch width adjusting dial counterclockwise to
decrease the stitch width.
You can also change the setting with the "+" or "–" key.
Press the "+" key to increase the stitch width.
Press the "–" key to decrease the stitch width.
NOTE:
The adjustable range for patterns U6-U7 and U9-U11
is 0.0 to 7.0.
50