Removing And Attaching The Foot Holder - ELNA eXcellence 782 Instruction Book

1.
(1)
(3)
2.
(5)
(4)
(1)
1. 2.

Removing and Attaching the Foot Holder

Remove the foot holder before using professional grade
foot HP, ruler work foot QR, darning foot PD-H, dual feed
foot AD or A.S.R. (Accurate Stitch Regulator).
CAUTION:
Always make sure to press the lockout key to lockout
the machine before replacing the foot holder.
(2)
Removing the foot holder
1. Raise the needle by pressing the needle up/down
button.
Press the lockout key and raise the presser foot with
the presser foot lifter.
(1) Needle up/down button
(2) Lockout key
(3) Presser foot lifter
2. Loosen the thumbscrew and remove the foot holder.
(4) Thumbscrew
(5) Foot holder
Attaching the foot holder
1. Attach the foot holder to the presser bar from the
rear.
(2)
Lower the presser foot with the presser foot lifter.
(1) Foot holder
(2) Presser bar
2. Tighten the thumbscrew securely with the
screwdriver.
(3) Thumbscrew
(3)
29