Securing The Cables - ATEN KN1132VB Series User Manual

Securing the Cables

For added safety, use ATEN Lok-U-Plug cable holders to secure the cables of
your powered devices in place on the KVM over IP switches. Secure the cable
holders using the specially designed holes around the individual power outlets,
as shown below:
Note: 1. Cable holders are an optional accessory. See Cable Holders, page 8.
2. Only the ATEN Lok-U-Plug cable holders that have been specifically
designed to work with the KVM over IP switches can be used. Using
any other kinds of cable securing device could potentially result in
irreversible damage or harm to the KVM over IP switches or users.
Chapter 2. Hardware Setup
45