Port Id Numbering; Port Selection - ATEN KN1132VB Series User Manual

KVM over IP User Manual

Port ID Numbering

Each server on the installation is assigned a unique Port ID. Its Port ID is a one
or two segment number that is determined as follows:
 A server attached to a First Stage unit has a one segment Port ID (from 1–
64) that corresponds to the KVM Port number that it is connected to.
 A server attached to a Second Stage unit has a two segment Port ID:
 The second segment (from 1–16), represents the KVM Port number on
the Second Stage unit that the server is connected to.
 The first segment (from 1–64) represents the KVM Port number on the
First Stage unit that the Second Stage unit links back to.
For example, a Port ID of 20 - 3 refers to a server that is connected to KVM
Port 3 of a Second Stage unit that links back to KVM Port 20 of the First Stage
unit:

Port Selection

Port selection is accomplished by means of the GUI. Port selection details are
discussed in Chapter 6, Port Access.
52
Port 20
Port 3
ID = 20-3