ATEN KN1132VB Series User Manual page 218

KVM over IP User Manual
To add a MAC filter, do the following:
1. Click Add. A dialog box similar to the one below appears:
2. Specify the MAC address in the dialog box, then click OK.
3. Repeat these steps for any additional MAC addresses you want to filter.
 IP Filter / MAC Filter Conflict
If there is a conflict between an IP filter and a MAC filter – in other words,
if a computer's address is allowed by one filter but blocked by the other –
then the blocking filter takes precedence (the computer's access is
blocked).
 Modifying Filters
To modify a filter, select it in the IP Filter or MAC Filter list boxes and
click Modify. The Modify dialog box is similar to the Add dialog box.
When it comes up, simply delete the old address(es) and replace it with the
new one(s).
 Deleting Filters
To delete a filter, select it in the IP Filter or MAC Filter list box and click
Delete.
200