Appendix; Safety Instructions; General - ATEN KN1132VB Series User Manual

Safety Instructions

General

 This product is for indoor use only.
 Read all of these instructions. Save them for future reference.
 Follow all warnings and instructions marked on the device.
 Do not place the device on any unstable surface (cart, stand, table, etc.). If
the device falls, serious damage will result.
 Do not use the device near water.
 Do not place the device near, or over, radiators or heat registers.
 The device cabinet is provided with slots and openings to allow for
adequate ventilation. To ensure reliable operation, and to protect against
overheating, these openings must never be blocked or covered.
 The device should never be placed on a soft surface (bed, sofa, rug, etc.) as
this will block its ventilation openings. Likewise, the device should not be
placed in a built in enclosure unless adequate ventilation has been
provided.
 Never spill liquid of any kind on the device.
 Avoid circuit overloads. Before connecting equipment to a circuit, know
the power supply's limit and never exceed it. Always review the electrical
specifications of a circuit to ensure that you are not creating a dangerous
condition or that one doesn't already exist. Circuit overloads can cause a
fire and destroy equipment.
 Unplug the device from the wall outlet before cleaning. Do not use liquid
or aerosol cleaners. Use a damp cloth for cleaning.
 The device should be operated from the type of power source indicated on
the marking label. If you are not sure of the type of power available,
consult your dealer or local power company.
 To prevent damage to your installation it is important that all devices are
properly grounded.
 The device is designed for IT power distribution systems with 230V
phase-to-phase voltage.
 The device is equipped with a 3-wire grounding type plug. This is a safety
feature. If you are unable to insert the plug into the outlet, contact your

Appendix

257