Assembling Torch - Kemppi Flexlite GXe Series Operating Manual

3.1 Assembling torch

For the correct components, refer to "Component selection" on page 42.
Tools needed:
8mm
1. Attach the contact tip adapter and hand-tighten it firmly in place. It is important to tighten the adapter properly to
enable a tight connection of the contact tip to the torch.
2. Attach the contact tip and secure it with spanner.
3. Attach the gas nozzle and hand-tighten it firmly in place.
© Kemppi
8
Flexlite GXe
Operating manual - EN
1922260 / 2343