Using Torch Remote Gre80 (Series 8) - Kemppi Flexlite GXe Series Operating Manual

4.2 Using torch remote GRe80 (series 8)

The series 8 Flexlite GXe welding torches can be used with X5 FastMig and Master M (350 models) welding equip-
ment only.
With the GRe80 welding torch remote control, you can select memory channels and adjust wire feed speed, welding cur-
rent, welding voltage or voltage fine tuning depending on the welding process used.
1. Custom LCD display
>> Displays the adjusted parameter and notifies if there is an error ("Err") in the welding system.
2. Plus/minus (+/-) buttons
>> Changes the parameter value.
3. Left/right arrow buttons
>> Changes between adjustable parameters/views.
Remote control display items
a. Memory channel symbol and selected memory channel
b. Wire feed speed and fine tuning symbols
c. Adjusted parameter value (or error indicator)
d. Adjusted parameter unit
When the parameter is adjusted with the remote and the parameter value doesn't reflect the one saved on the selected
memory channel anymore, this is indicated on the display by showing only the memory channel number without the
channel box around it:
© Kemppi
23
Flexlite GXe
Operating manual - EN
1922260 / 2343