Using Torch Remote Gre50 (Series 5) - Kemppi Flexlite GXe Series Operating Manual

Flexlite GXe
Operating manual - EN

4.1 Using torch remote GRe50 (series 5)

Adjust the wire feed speed or change the memory channel by turning the roller switch on the torch handle.
By default, the roller switch adjustment is stepwise according to the number values on the roller. The adjustment feel of
the roller can be changed to stepless by turning the screw under the roller switch. This requires removing the roller
switch temporarily.
22
© Kemppi 1922260 / 2343