Installation - Kemppi Flexlite GXe Series Operating Manual

3. INSTALLATION

Ensure that the welding equipment is not connected to the mains or that the welding torch is not connected to the
welding machine until the installation is complete.
Protect the equipment from rain and direct sunshine.
"Assembling torch" on the next page
"Installing torch remote" on page 9
"Connecting torch" on page 11
"Installing and replacing wire liner" on page 12
"Installing additional gun handle and heat protector (optional)" on page 19
Before installation and use
Ensure compliance with your local and national safety requirements regarding the installation and use of high voltage
units.
Check the contents of the packages and make sure the parts are not damaged.
© Kemppi
7
Flexlite GXe
Operating manual - EN
1922260 / 2343