Installing Additional Gun Handle And Heat Protector (Optional) - Kemppi Flexlite GXe Series Operating Manual

3.5 Installing additional gun handle and heat protector (optional)

The additional gun handle and heat protector are available for all Flexlite GXe MIG welding torches.
Gun handle
1. Keeping the bottom of the grip handle pointing forward, fit the inside grooves of the grip handle over the screws
on the torch.
2. Pull the handle backward to lock it in position.
To remove the grip handle, press the unlock button in the grip handle rear:
© Kemppi
19
Flexlite GXe
Operating manual - EN
1922260 / 2343