Required Tools - Lockly FLEX TOUCH PRO Installation Manual

Important, before getting started...
Lockly Flex Touch Pro is designed to work with existing standard
deadbolts. Before installing, check your existing deadbolt for smooth
and clean operation. With the door closed, the deadbolt should lock
and unlock without any resistance or binding.
If any resistance or binding exist, adjust or modify strike plate for smooth,
resistance free operation. Failure to do so will impede the performance
of the Lockly Flex Touch Pro.
If needed, Lockly offers standard mechanical deadbolts designed
to work with Lockly Flex Touch Pro to replace old or worn deadbolts.
To purchase, visit www.lockly.com/accessories or call our Customer
Hotline: (669) 500-8835.

Required Tools

You will need the following tools:
Phillips Screwdriver
*Modify door hole using a wood file or utility knife. When trim-
ming the door hole, make sure to have enough space for the
fingerprint sensor cable. Avoid cable from getting pinched or
tightly squeezed between the door surface and lock's ring or
shield.
Flathead Screwdriver
2
Wood File
*Optional