Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Lockly Manuals
  4. Door locks
  5. LATCH EDITION SECURE PGD628
  6. Installation manual

Lockly PGD628 Installation Manual

Hide thumbs Also See for PGD628:

Advertisement

Quick Links

Download this manual
SECURE
INSTALLATION
GUIDE
LATCH EDITION

Advertisement

loading

Related Manuals for Lockly PGD628

Summary of Contents for Lockly PGD628

  • Page 1 SECURE INSTALLATION GUIDE LATCH EDITION...
  • Page 2 Go to LOCKLY.com/installation to watch a video version of this installation guide. Download the BILT app in the Apple or Google Play store for step-by-step interactive 3-D walk-through installation instructions.
  • Page 3 LOCKLY Secure up and running. Installation generally takes less than 30 minutes. If you have any questions please reference our online support at: LOCKLY.com/support or call (669) 500-8835 for help. Reference installation parts overview foldout on back page...
  • Page 4 Preparation To complete the installation you will need: Phillips Screwdriver Flathead Screwdriver Tape measure or ruler Pliers Screwdriver with drill bits （Optional） Drilling is not required to install the lock, and is optional. However if you are installing your lock on a brand new door, a drill is required if there are no holes prepared for lock installation.

  • Page 5: Important Notice

    Preparation Remove existing door hardware, latch or deadbolts before installing the new lock. Use provided template to bore new holes if needed. " - 2" (35mm - 50mm) Measure and confirm your door is between 1 " - 2" ( 35mm - 50mm). Measure and confirm the hole in the door is 2 "...
  • Page 6 Step 1 INSTALLING THE LOCKSET Measure the distance between center of front door hole to the edge of your door and select the correct lockset. Select F1 if 2-3/8"(60mm) or F2 if 2-3/4"(70mm). 2-3/8" 8" (60mm) 2-3/4" (70mm) Facing the door exterior, install the lockset according to the opening direction of your door. Out-swing Door In-swing Door Secure lockset with provided...
  • Page 7 Step 2 CHANGING HANDLE FOR RIGHT OR LEFT SWING DOORS Determine right swing or left swing door While facing the door from the inside, if hinges are on the right side you have the right swinging door. If hinges on the left side you have a left swinging door. The lock ships set for right swing doors.
  • Page 8 Step 2 CHANGING HANDLE FOR RIGHT OR LEFT SWING DOORS continued Confirm that your installation was Check that your handle works complete by checking if the pins smoothly by giving it a turn up are flush against the handle, and and down.
  • Page 9 Step 2 CHANGING HANDLE FOR RIGHT OR LEFT SWING DOORS continued Changing the Interior Handle Orientation Securely screw clockwise as shown Remove the screw by turning counter clockwise and rotate the handle 180° in to complete your handle orientation the direction of the arrow as shown. change.
  • Page 10 Step 3 PREPARING LOCK FOR INSTALLATION If you drilled a hole in Preparation, use Slotted Barrel Extension and securely tighten with a flat head screwdriver by turning it clockwise onto the lock. If you did not drill a hole in Preparation, you can leave this pole removed.
  • Page 11 Step 4 INSTALLING THE LOCK (EXTERIOR) Exterior Install the exterior lock as shown to the left by aligning the lock straight and passing the cable and attached rods through the lockset. Align the lock straight and press hard (if you use the Adhesive tape in step 3.4) to secure the top of the lock.
  • Page 12 Step 5 INSTALLING THE LOCK (INTERIOR) Interior Insert Positioning Rods into the holes to the left and right of the Spindle The holes are located at the 3 o’clock and 9 o’clock positions. Interior Mounting Plate will go against the interior side of your door. Remove the paper layer off of the Adhesive Tape and align the...
  • Page 13 Step 5 INSTALLING THE LOCK (INTERIOR) continued Screw Pull the cable from the lock exterior through the rectangular hole underneath the positioning rods and spindle. Secure the hole above the spindle with screws *Secure top with Remove the position rods and replace them with screws Tighten clockwise until...
  • Page 14 Step 5 INSTALLING THE LOCK (INTERIOR) continued Plug cable that is coming through the door into the lock interior . Match red side of the plug with red on socket - insert tightly. NOTE: If you need to disconnect the cable, make sure to press the snap tab to release the plug before carefully pulling it out.
  • Page 15 Step 5 INSTALLING THE LOCK (INTERIOR) continued Once the lock interior is flush against the mounting plate, secure the lock to the P (3X) plate by screwing clockwise using provided screws Insert 4 AA batteries into the lock by aligning the positive and negative orientation markings on the batteries to the battery chamber.
  • Page 16 Step 6 INSTALLING THE DOOR STRIKE Close your door to see if your lock closes securely with your existing door strike. If the lock closes securely, you may keep the existing door strike without removing the old hardware. However, it’s recommended that you use our door strike.
  • Page 17 Step 7 DOWNLOAD THE LOCKLY ® APP Congratulations! You have completed the LOCKLY Secure physical lock installation. To complete your setup, download the LOCKLY app from the iOS or Google Play app Store and follow on-screen instructions. Scan or visit...
  • Page 18 Smart Home Ready SECURE LINK You can add live status monitoring and voice control capabilities to your LOCKLY ® Smart Lock with Amazon Alexa or Google Assistant via installing the Secure Link (PGH200) Wi-Fi Hub and Door Sensors (Sold Separately) Know it’s Closed.
  • Page 19 FCC Warning： This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
  • Page 20 BM4 x 32MM Screw Spindle Exterior Assembly Positioning Rod For installing mounting plate (LK) Latch AUTHENTIC LOCKLY PRODUCT | DESIGNED IN USA | CARD IS PRINTED WITH A SPECIFIC PATTERN Locking Pin KA4 x 20MM Screw Keys Strike Plate LOCK SERIAL PGDxxxxxxxxxx...

  • Page 21: Connect With Us

    Connect with us @meetLOCKLY | #LOCKLY...
  • Page 22 Reference installation parts overview foldout.
  • Page 23 SECURE We’re here to help! help@LOCKLY.com For the latest version of this manual, please visit the following link: LOCKLY.com/help IMPGD62820200923...