Model Description; Model Designation - Hatco CWBP Series Installation And Operating Manual

English
All Models
Hatco Refrigerated Drop-In Wells are reliable and versatile.
Each unit has an insulated, stainless steel and aluminized steel
housing. The sides of the internal well are completely surrounded
with a copper evaporator coil to provide even chilling from top to
bottom. The Refrigerated Drop-In Well is controlled with a digital
temperature controller and a Power I/O (on/off) Switch housed
in a single, remote-mountable control panel. The control panel
is connected to the condensing unit with a 48" (1219 mm) power
cord. A 6' (1829 mm) power cord and plug connected to the
control panel provides power to the entire unit.
All models are designed to be mounted to the topside of
various types of countertop material including stainless steel,
wood, Corian, Swanstone, etc... Hatco Refrigerated Drop-In
Wells are designed, manufactured, and tested to maintain safe
food holding temperatures.
CWBPM-0923
Refrigerated Drop-In Wells (CWBP-3 Model Shown)
C W B P - x
Cold Well
Built-In
5

MODEL DESCRIPTION

The ecoization logo identifies products designed to reflect
Hatco's commitment to improving, protecting, and preserving
the global environment. Hatco refrigerated units qualify for the
ecoization logo through the use of green-friendly insulation as
well as a highly efficient hydrocarbon condensing unit.
Each model of Refrigerated Drop-In Well is supplied from
the factory with the appropriate number of 20" (508 mm) Pan
Support Bars, depending on the model's pan capacity.
Each individual well is capable of holding a variety of pan
combinations of full size, 1/2-size, 1/3-size, and/or 1/6-size
pans with accessory Adapter Bars.
Food Pans, Pan Support Bars, Adapter Bars, and other
accessories are available for the Refrigerated Drop-In Wells.
Refer to the OPTIONS AND ACCESSORIES section in this
manual for details.
Pans Not Included

MODEL DESIGNATION

Full-Size Pan Capacity
Propane (Hydrocarbon Refrigerant)