Model Description; Model Designation - Hatco FTBP-S Series Installation And Operating Manual

English
All Models
Hatco Drop-In Frost Top Shelves are reliable and versatile.
Each unit has an insulated, stainless steel and aluminized steel
housing. The bottom of the recessed frost top enclosure is
covered with a copper evaporator coil to provide even cooling
from edge to edge. A 1" NPSM drain in the recessed enclosure
is standard on all units except the FTBP-3/4 and FTBP-1.
Drop-In Frost Top Shelves are controlled by a digital temperature
controller and a Power I/O (on/off) Switch housed in a single,
remote-mountable control panel. The control panel is connected
to the condensing unit with a 48" (1219 mm) power cord. A 6'
(1829 mm) power cord and plug connected to the control panel
provides power to the entire unit. All models are designed to be
mounted to the topside of various types of countertop material
including stainless steel, wood, Corian, Swanstone, etc... Hatco
Drop-In Frost Top Shelves are designed, manufactured, and
tested to maintain safe food holding temperatures.
The ecoization logo identifies products designed to reflect
Hatco's commitment to improving, protecting, and preserving
the global environment. Hatco refrigerated units qualify for the
ecoization logo through the use of green-friendly insulation as
well as a highly efficient hydrocarbon condensing unit.
Model FTBP-2
(Hydrocarbon Refrigerant)
FTBPM-0923
Pans not included.
Drop-In Frost Top Shelves (Models FTBP-2 and FTBP-S2 shown)
F T B P - S x
Frost Top
Drop-In
Propane

MODEL DESCRIPTION

FTBP-X Models
FTBP-X Models are available in 3/4, one, two, and three pan
configurations. These models orient full-size sheet pans in the
standard position with the short side facing the customer.
FTBP-SX Models
FTBP-SX Models are available in two and three pan
configurations. These models are "slim" designed and orient
full-size sheet pans with the long side facing the customer. The
slim design allows easy, reachable access to everything on the
frost top.
NOTE: Sheet Pans are available for the Drop-In Frost Top
Shelves. Refer to the OPTIONS AND ACCESSORIES
section in this manual for details.
Model FTBP-S2

MODEL DESIGNATION

Full-Size Sheet Pan Capacity
No Character = Standard Depth
S = Slim Depth
5