Installing The Amperometric Detector; Connecting The Instrument To A Computer - Metrohm 930 Compact IC Flex ChS Manual

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
3.12

Installing the amperometric detector

3.13

Connecting the instrument to a computer

Accessories
930 Compact IC Flex ChS (2.930.1200)
Coupling (6.2744.040)
￭
2 × pressure screw (6.2744.010)
￭
1 Connect the out capillary of the Metrohm Suppressor Module (MSM)
and the detector inlet capillary to each other using a coupling
(6.2744.040) and two short pressure screws (6.2744.070).
The 930 Compact IC Flex provides enough space for one detector and
additional accessories in the detector chamber. The detector is available as
separate device and is supplied with a separate manual.
Placing the detector in the instrument
Follow the instructions in the chapter Inserting the detector in the manual
for the detector.
NOTE
If the instrument is connected to the computer, then it must be
switched off.
For this step, you need the following accessories:
USB connection cable (6.2151.020) from the accessory kit: Vario/Flex
￭
Basic (6.5000.000)
3 Installation
￭￭￭￭￭￭￭￭
37