52
INSPECTION AND MAINTENANCE
Description
Warning system
Stop switch
Bolt, nut
Sliding part / rotating part
Grease nipples
Outer equipment
Anode
Top cowl / Latch
*"
" This procedure can be performed by end user (or dealer)
*"
" This procedure shall be carried out by the dealer.
Outboards used in rental, commercial, or other under severe condition as described
below in detail require more frequent inspections and maintenance than shown in this
manual.
Continuous operation at maximum engine speed
Continuous operation at idling or trolling speed
Operation without appropriate warm up
Stopping without sufficient time for the engine to cool down
Frequent sudden acceleration and sudden deceleration
Frequent stop start operation
Frequent shifting operation
Frequent operation in acidic, polluted, muddy, sandy, or shallow water
Appropriate maintenance can prolong your engine life.
10
Consult your Tohatsu authorized dealer for suitable maintenance interval depending on
operating and environmental conditions.
Inspection intervals
Every
Every
Every
First 20
50
100
200
hours
hours
hours
hours
hours
or 1
or 3
or 6
or 1
month
months
months
year
/
/
Every
400
Inspection procedure
or 2
year
Check
Check
Retighten
Apply grease
Pump in grease
Check
Check /Replace if necessary
Check /Adjustment
Remarks
Refer to P36
Refer to P60
Refer to P60
Refer to P59