Starting The Engine - TOHATSU MFS 5D LPG Owner's Manual

Hide thumbs Also See for MFS 5D LPG:
Table of Contents

Advertisement

30
ENGINE OPERATION
1. Close
2. Connect the hose to the LPG tank by
turning connector counter-clockwise.
7
1. Connect
3. Connect the hose connector to the
engine side by turning connector
clockwise.
1. Connect
1
ENOF00210-0
ENOF01526-0
1
ENOF00210-0
ENOF01527-0
1
ENOF00210-0
ENOF01528-0
4. Fully open the valve of the LPG tank
slowly.
1
1. Open
ENOM00045-C

2. Starting the engine

ENOW00958-1
WARNING
 Do not remove or install the top cowl
after the engine has started.
 The exposed rotating engine parts cause
serious injury.
ENOW00959-0
CAUTION
The top cowl must be installed while the
engine running except in an emergency. If
the top cowl is not installed correctly, water
splash can damage the engine.
ENOW00036-1A
CAUTION
When starting the outboard motor in the
test tank, make sure that:
1. Water level is at least 10 cm (4 in.) above
the anti-ventilation plate to avoid over-
heating of the engine.
2. Run at idling only
3. Remove the propeller
(See page 56)
ENOF00210-0
ENOF01529-0

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mfs f5d lpg sp 2

Table of Contents