Equinox Systems Helix Scan XP 150W Scanner User Manual page 17

Manual mode:
To access manual mode, press the "MENU" button on the front of the unit to show
display. Now press the "ENTER" button and use the "UP" and "DOWN" buttons to choose between
tILt diNN
(Pan), (Tilt),
FoCu
(Gobo Rotation),
"DOWN" buttons to choose between
Press the "ENTER" button to confirm the setting. To exit out of any of the above options, press the
"MENU" button.
Fixture temperature:
To access the fixtures temperature, press the "MENU" button and use the "UP" and "DOWN" buttons on
the rear of the unit to show
The unit will now display the fixtures temperature.
To exit out of any of the above options, press the "MENU" button.
Fixture hours:
To access the fixtures usage time, press the "MENU" button and use the "UP" and "DOWN" buttons on
the rear of the unit to show
The unit will now display the fixtures usage time (hours).
To exit out of any of the above options, press the "MENU" button.
Software version:
To access the fixtures software version, press the "MENU" button and use the "UP" and "DOWN" buttons
on the rear of the unit to show
The unit will now display the fixtures software version.
To exit out of any of the above options, press the "MENU" button.
Factory default:
To access the factory default setting, press the "MENU" button and use the "UP" and "DOWN" buttons
on the rear of the unit to show
"UP" and "DOWN" buttons to choose between
setting. To exit out of any of the above options, press the "MENU" button.
Gobo/colour wheel home position adjustment:
To access the offset menu for the gobo, colour, gobo rotation and mirror rotation home position
adjustment settings, press the "MENU" button once and hold the "ENTER" button for 3 seconds
Pan
to display (Pan) on the LED display. Now use the "UP" and "DOWN" buttons to choose
tiLt
between (Tilt),
Press the "ENTER" button and use the "UP" and "DOWN" buttons to set the required gobo wheel
home position between
www.prolight.co.uk
Stro
(Dimmer), (Strobe),
Pris
(Prism). Press the "ENTER" button and use the "UP" and
(Focus) or
000 255
~
tENp
on the LED display. Now press the "ENTER" button.
FHrS
on the LED display. Now press the "ENTER" button.
vEr
on the LED display. Now press the "ENTER" button.
dEFA
on the LED display. Now press the "ENTER" button and use the
yes
Gobo CoLo
(Gobo),
000 255
~ . Press the "ENTER" button to confirm the setting.
Helix Scan XP 150W Scanner User Manual
Operating instructions
CoLo
(Colour),
.
nO
or . Press the "ENTER" button to confirm the
rGob
(Colour) or (Gobo Rotation).
NANU
on the LED
Gobo rGob
(Gobo),
Pan
17