Equinox Systems Helix Scan XP 150W Scanner User Manual page 16

Pan and tilt restriction:
To restrict the pan and tilt movement, press the "MENU" button and use the "UP" and "DOWN" buttons
on the rear of the unit to show
the "UP" and "DOWN" buttons to choose
"DOWN" buttons to select either
"DOWN" buttons to select either
Press the "ENTER" button to confirm the setting. To exit out of any of the above options, press the
"MENU" button.
Sound active:
To access the sound active setting, press the "MENU" button and use the "UP" and "DOWN" buttons on
the rear of the unit to show
and "DOWN" buttons to choose between
To exit out of any of the above options, press the "MENU" button.
Sound sensitivity:
To adjust the sound sensitivity, press the "MENU" button and use the "UP" and "DOWN" buttons on the
rear of the unit to show
and "DOWN" buttons to choose between
Value: 0 - 100 (0 = low, 100 = high)
To exit out of any of the above options, press the "MENU" button.
DMX signal lost:
To change what the unit does when the DMX signal is lost, press the "MENU" button and use the "UP"
and "DOWN" buttons on the rear of the unit to show
button and use the "UP" and "DOWN" buttons to choose between
LAst
(Hold the last DMX command) or
Press the "ENTER" button to confirm the setting. To exit out of any of the above options, press the
"MENU" button.
Display blackout:
To access the display blackout setting, press the "MENU" button and use the "UP" and "DOWN" buttons
on the rear of the unit to show
"UP" and "DOWN" buttons to choose between
Press the "ENTER" button to confirm the setting. To exit out of any of the above options, press the
"MENU" button.
Display invert setting:
To access the display invert setting, press the "MENU" button and use the "UP" and "DOWN" buttons on
the rear of the unit to show
and "DOWN" buttons to choose between
To exit out of any of the above options, press the "MENU" button.
www.prolight.co.uk
SHnd
on the LED display. Now press the "ENTER" button and use
res
pan tiLt
or
yes nO
or .
SoUn
on the LED display. Now press the "ENTER" button and use the "UP"
on
or
SEns
on the LED display. Now press the "ENTER" button and use the "UP"
000
nASt
LEd
on the LED display. Now press the "ENTER" button and use the
dIsp
on the LED display. Now press the "ENTER" button and use the "UP"
on
or
Helix Scan XP 150W Scanner User Manual
. Now press the "ENTER" button and use the "UP" and
. Now press the "ENTER" button and use the "UP" and
ofF
. Press the "ENTER" button to confirm the setting.
100
~ . Press the "ENTER" button to confirm the setting.
dNSt
on the LED display. Now press the "ENTER"
bLnd
(Master/Slave).
on
(display blacks out) or
ofF
. Press the "ENTER" button to confirm the setting.
Operating instructions
(Blackout),
ofF
(display always on).
16