Installation - Equinox Systems Helix Scan XP 150W Scanner User Manual

Installation

Before installing the fixture, the supporting structure (ie. truss) must be able to hold a minimum of
10 times the fixtures weight without any deformation (eg. 15kg - 150kg point load). The fixture must
be secured with a secondary safety attachment when being installed (ie. an appropriate safety cable).
Never stand directly below the fixture when mounting, removing, and/or servicing.
Overhead installation requires experience and qualifications to calculate working load limits,
the material being used at the installation area and periodic safety inspections of the fixture and
installation material. If you do not have the relevant experience and/or qualifications please do not
attempt the installation yourself. The installation should be checked annually by a qualified person.
CAUTION: HOT!
The Helix Scan XP 150W Scanner can be operated in a number of mounting positions as shown in the
diagram above, hanging upside-down from the ceiling or truss, mounting sideways on truss or stood
upright on a flat level surface. Always use a safety wire as an extra safety precaution to prevent
damage/injury in the event a clamp fails (see the next page for clamp installation).
Never use the carry handles for secondary attachments.
www.prolight.co.uk Helix Scan XP 150W Scanner User Manual
7