Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Equinox Systems Stratos Duo RGB
Summary of Contents for Equinox Systems Stratos Duo RGB
- Page 1 Stratos Duo RGB User Manual Order code: EQLED371...
-
Page 2: Safety Advice
NO USER SERVICEABLE PARTS. pulling the power-cable. • This lighting fixture is for professional use only - it is • Make sure that the available mains supply voltage is not designed for or suitable for household use. The between 100~240V AC, 50/60Hz. product must be installed by a qualified technician in accordance with local territory regulations. The safety of • Make sure that the power cable is never crimped or the installation is the responsibility of the installer. The damaged. Check the equipment and the power cable fixture presents risks of severe injury or death due to fire periodically. hazards, electric shock and falls. • If the equipment is dropped or damaged, disconnect the • Warning! Risk Group 2 LED product according to mains power supply immediately and have a qualified EN 62471. Do not view the light output with optical engineer inspect the equipment before operating again. instruments or any device that may concentrate the beam. • WARRANTY: One year from date of purchase. OPERATING DETERMINATIONS If this equipment is operated in any other way, than those described in this manual, the product may suffer damage and the warranty becomes void. Incorrect operation may lead to danger e.g: short-circuit, burns and electric shocks etc. Do not endanger your own safety and the safety of others! Incorrect installation or use can cause serious damage to people and/or property. www.prolight.co.uk Stratos Duo RGB User Manual... - Page 3 • Supplied with IR remote 30° - Lux FULL ON 11500 2874 1280 2460 98.4 Specifications Stratos Duo RGB 7880 1969 Power consumption 80.9 45.5 29.1 Power supply 100~240V, 50/60Hz Fuse F1A 250V 30° Dimensions 265 x 426 x 80mm Weight 3.4kg Order codes EQLED371 426mm 80mm www.prolight.co.uk Stratos Duo RGB User Manual...
-
Page 4: Technical Specifications
DMX INPUT DMX OUTPUT POWER OUTPUT: 100-240V~50/60Hz 100-240V~50/60Hz 01 - Earth 05 - 3-Pin DMX input In the box: 1 x fixture, 02 - LED display 06 - 3-Pin DMX output 09 - Fuse F1A 250V 1 x IR remote, 03 - Function buttons 07 - PowerCON input 10 - Bracket knobs 1 x power cable, & 1 x user manual 04 - Microphone 08 - PowerCON output 11 - Bracket www.prolight.co.uk Stratos Duo RGB User Manual... - Page 5 0 0 1 b 2 5 5 d I 1 d I N N Master dimmer d I 9 S L A V Slave mode I n F r IR remote on/off o F F www.prolight.co.uk Stratos Duo RGB User Manual...
- Page 6 Operating instructions LED configuration: www.prolight.co.uk Stratos Duo RGB User Manual...
-
Page 7: Operating Instructions
2 channel mode: 3 channel mode: Channel Value Function Channel Value Function 000-255 Master dimmer (0-100%) 000-255 Red dimmer (0-100%) 000-009 No function 000-255 Green dimmer (0-100%) 010-049 Red 000-255 Blue dimmer (0-100%) 050-089 Green 090-129 Blue 130-169 Yellow 170-209 Magenta 210-249 Cyan 250-255 White www.prolight.co.uk Stratos Duo RGB User Manual... - Page 8 000-255 Blue 6 dimmer (0-100%) 000-255 Red 7 dimmer (0-100%) 000-255 Red 1 dimmer (0-100%) 000-255 Green 2 dimmer (0-100%) Right CH10 000-255 Blue 3 dimmer (0-100%) Half CH11 000-255 Red 4 dimmer (0-100%) of CH12 000-255 Green 5 dimmer (0-100%) Unit CH13 000-255 Blue 6 dimmer (0-100%) CH14 000-255 Red 7 dimmer (0-100%) Please note: LED configuration diagram on page 6. www.prolight.co.uk Stratos Duo RGB User Manual...
- Page 9 CH18 Half 130-169 Yellow of Unit 170-209 Magenta 210-249 Cyan 250-255 White 000-009 No function 010-049 Auto mode 1 050-089 Auto mode 2 CH19 090-129 Auto mode 3 130-169 Sound mode 1 170-209 Sound mode 2 210-255 Sound mode 3 Please note: LED configuration diagram on page 6. www.prolight.co.uk Stratos Duo RGB User Manual...
- Page 10 So 1 So 3 choose one of the sound modes between Press the “ENTER” button to confirm the setting. To exit out of any of the above options, press the “MENU” button. Speed setting: To access the speed setting for auto and sound modes, press the “MENU” button and use the “UP” and SPEE “DOWN” buttons to show on the LED display. Now press the “ENTER” button and use the “UP” SP 1 SP 9 and “DOWN” buttons to select between Press the “ENTER” button to confirm the setting. To exit out of any of the above options, press the “MENU” button. Sound sensitivity: To access the sound sensitivity setting, press the “MENU” button and use the “UP” and “DOWN” buttons SEns to show on the LED display. Now press the “ENTER” button and use the “UP” and “DOWN” SE 1 SE 9 buttons to select the sound sensitivity between Press the “ENTER” button to confirm the setting. To exit out of any of the above options, press the “MENU” button. www.prolight.co.uk Stratos Duo RGB User Manual...
-
Page 11: Master Dimmer
To access the master dimmer setting, press the “MENU” button and use the “UP” and “DOWN” buttons dINN to show on the LED display. Now press the “ENTER” button and use the “UP” and “DOWN” dI 1 dI 9 buttons to select the brightness between Press the “ENTER” button to confirm the setting. To exit out of any of the above options, press the “MENU” button. Please note: this overrides the brightness for static colour, auto, sound and colour mix modes. Master/slave mode: To set the master unit, press the “MENU” button and use the “UP” and “DOWN” buttons to select one of the program modes. To set the other units in slave mode, press the “MENU” button and use the “UP” and “DOWN” buttons to SLAV show on the LED display. Press the “ENTER” button to confirm the setting. The unit will now run in sequence with the master unit. To exit out of any of the above options, press the “MENU” button. Please ensure that all slave units are set to the same DMX channel mode as the master unit. IR remote setting: To access the IR remote setting, press the “MENU” button and use the “UP” and “DOWN” buttons to InFr show on the LED display. Now press the “ENTER” button and use the “UP” and “DOWN” buttons to choose between or . Press the “ENTER” button to confirm the setting. To exit out of any of the above options, press the “MENU” button. www.prolight.co.uk Stratos Duo RGB User Manual... - Page 12 SENSI- STROBE SPEED followed by the ‘+’ and ‘–’ buttons will then allow the TIVITY sound sensitivity be adjusted FADE 04 - Activates the strobe, use the ‘+’ and ‘–’ buttons MANUAL UNIT to adjust the strobe speed 05 - Sets the auto mode speed. Press this button followed by the ‘+’ and ‘–’ buttons to adjust the program speed 06 - Sets the sound mode sensitivity. Press this button followed by the ‘+’ and ‘–’ buttons to adjust the sound sensitivity 07 - Activates the DMX mode Please note: the DMX address and channel must be preset in the menu 08 - Activates the static colour/manual modes, use the ‘+’ and ‘–’ buttons to select a colour from the pre- programmed static colours or use the ‘R’, ‘G’ or ‘B’ buttons to create a manual colour. Pressing the ‘Fade/unit’ button allows the chosen colour to enter the fade program 09 - Activates the fade mode 10 - Manual colour selection A - Red B - Green C - Blue 11 - Adjusts the auto mode, sound mode, speed, sound sensitivity, strobe speed and static colour/manual colour modes 12 - Sets the brightness of auto, sound, static colour and manual modes (1 - low brightness, 9 - high brightness) www.prolight.co.uk Stratos Duo RGB User Manual...
-
Page 13: Dmx Setup
DATA cable (DMX cable) requirements (for DMX operation): This fixture can be controlled via DMX-512 protocol. The DMX address is set on the back of the unit. Your unit and your DMX controller require a standard 3-pin XLR connector for data input/output, see image below. Further DMX cables can be purchased from all good sound and lighting suppliers or Pro Light Concepts dealers. Please quote: CABL10 – 2m CABL11 – 5m CABL12 – 10m Also remember that DMX cable must be daisy chained and cannot be split. www.prolight.co.uk Stratos Duo RGB User Manual... -
Page 14: Line Termination
5-pin XLR (male) 3-pin XLR (female) Pin 1: GND (screen) Pin 1: GND (screen) Pin 2: Signal (-) Pin 2: Signal (-) Pin 3: Signal (+) Pin 3: Signal (+) Pin 4: N/C Pin 5: N/C www.prolight.co.uk Stratos Duo RGB User Manual... -
Page 15: Weee Notice
WEEE notice Correct Disposal of this Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature, indicates that it should not be disposed of with other household wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal. www.prolight.co.uk Stratos Duo RGB User Manual... - Page 16 Stratos Duo RGB User Manual...