Table of Contents
Advertisement
COPIER FEATURE EXPANDER INSTALLATION
3.13 COPIER FEATURE EXPANDER INSTALLATION
[B]
A887I704.WMF
ø
CAUTION
Before installing this option, turn off the main switch and disconnect the
power cord, the telephone line, and the network cable.
NOTE: If an expansion box was installed, remove it before starting the following
procedure.
1. Remove the connector cover [A] and rear cover [B], as shown (5 screws).
2. Attach the board [C] to the bracket [D] (2 screws).
3. Remove screw [E].
4. Install the board assembly [F] (3 screws, including screw [E]).
[A]
[C]
3-38
20 September 1999
[D]
[F]
A887I101.WMF
[E]
Advertisement
Table of Contents
