Ricoh AFICIO A267 Service Manual page 180

20 September 1999
Mode No.
Class Class
1 and 2 3
3rd Bottom Plate
Pressure
Re-adjustment
(Middle Size)
(Optional PFU)
5
3rd Paper Amount
(Small Size)
6
(Optional PFU)
3rd Paper Amount
(Middle Size)
1-910*
7
(Optional PFU)
3rd Small Paper
Size Setting
(Optional PFU)
8
3rd Middle Paper
Size Setting
(Optional PFU)
9
Function
Adjusts the upper paper lift motor forward
rotation time for paper sizes larger than the
small size threshold set with SP1-910-8, up
to and including the middle size threshold
set with SP1-910-9.
The motor rotates forward when the
remaining paper is lower than the value of
SP1-910-7.
If a middle size threshold is not stored with
SP1-910-9, this SP is not used.
Use this SP when a paper feed problem
occurs when paper in the 3rd paper tray is
running low.
See "Optional Paper Tray Unit - Paper Lift
Mechanism" for details on SP1-910.
Selects the remaining paper amount limit for
use with SP1-910-4.
Set this SP to 2 or 3 when a paper feed
problem occurs before near-end.
See "Optional Paper Tray Unit - Paper Lift
Mechanism" for details on SP1-910.
Selects the remaining paper amount limit for
use with SP1-910-5.
Set this SP to 2 or 3 when a paper feed
problem occurs before near-end.
See "Optional Paper Tray Unit - Paper Lift
Mechanism" for details on SP1-910.
Selects the small size threshold for the 3rd
paper tray.
"0" means that this setting is not used.
The size used by SP1-910 is determined by
paper width. See "Optional Paper Tray Unit -
Paper Lift Mechanism" for details on SP1-
910.
Selects the middle size threshold for the
upper tray.
"0" means that this setting is not used.
The value must be larger than the small size
threshold (SP1-910-8). The size used by
SP1-910 is determined by paper width. See
"Optional Paper Tray Unit - Paper Lift
Mechanism" for details on SP1-910.
4-13
SERVICE PROGRAM MODE
Settings
0 ~ 2000
1 ms/step
300 ms
0: None
(Empty)
1: Near End
2: 25%
3: 75%
0: None
(Empty)
1: Near End
2: 25%
3: 75%
0: None
(Not used)
1: HLT/A5
2: A4
3: LT
4: DLT
5: A3
0: None
(Not used)
1: HLT/A5
2: A4
3: LT
4: DLT
5: A3