Ricoh AFICIO A267 Service Manual page 216

20 September 1999
Mode No.
Class Class
1 and 2 3
PCU Alarm Setting
(Display)
1
5-912*
PCU Alarm Setting
(Interval)
2
UP Mode Data
Reset
5-913
Printer Counter
Display
5-914*
Language UK/TW
Priority
5-916
Serial Number
5-925
Display
Fax Forwarding
Mode
5-930*
BICU Software
5-932 Upload
(for designer)
BICU Software
5-933 Download
(for designer)
Image Rotation
5-940*
Mode
Duplex Blank Page
5-941*
Function
Selects whether the PCU alarm message
(Change Photoconductor Unit) blinks when
the PCU alarm interval expires.
When installing the machine, if the customer
requires that the PCU alarm message blink,
select "1". If set to "0", there will be no
message.
Sets the PCU alarm interval.
When the machine reaches this value, the
PCU alarm will be displayed on the LCD to
inform the user. Only used if SP5-912-1 is at
"1".
Resets the user tool data.
Except for the user codes, key operator
code, and key operator printer counter.
Set this SP to 1. Then press down the
"Original Type" key and the "OK" key or é
key at the same time to reset the data. If the
reset was successful, the beeper will sound
5 times. If it failed, the beeper will sound
only twice.
Selects whether the printer counter is
displayed in the LCD or not.
If this is "0", it does not display or print out in
the counter print out.
Asia and Taiwan versions only.
Select the default language of SP5-808.
This value will not reset when Memory All
Clear (SP5-801) is done.
Displays the serial number.
Selects whether the fax mode key is
accepted when an SC has occurred.
When an SC occurs while there are
received fax messages in the SAF memory,
change the value to "1". Then access
facsimile mode. Then forward the incoming
data to another fax machine by using the fax
mode bit switches.
This SP is for designers only. Do not
perform this SP.
This SP is for designers only. Do not
perform this SP.
Selects whether the image can be rotated or
not.
Selects whether the blank page is made on
the front side or back side when duplex copy
mode is selected.
4-49
SERVICE PROGRAM MODE
Settings
0: No
1: Yes
1~ 255
1k
copies/step
60k copies
0: No
1: Yes
0: No
1: Yes
0: UK (Asia
version)
1: TW
(Taiwan
version)
0: No
1: Yes
0: No
1: Yes
0: No
1: Yes
0: Enabled
1: Disabled
0: Back
Side
1: Front
Side