Table of Contents
Advertisement
SERVICE PROGRAM MODE
Mode No.
Class
Class
1 and 2
3
Binding Hole Range
6-911*
Total Operation
7-001*
Time
Total Original
1
Counter (All Modes)
Total Original
7-002*
2
Counter (Copier)
Total Original
3
Counter (Fax)
Total Print Counter
1
(All Modes)
Total Print Counter
2
(Copier)
7-003*
Total Print Counter
3
(Fax)
Total Print Counter
4
(Printer)
CE Counter Setting
7-004*
Copy Counter -
1
Paper Size (A3)
Copy Counter -
2
Paper Size (B4)
Copy Counter -
3
Paper Size (A4)
Copy Counter -
4
Paper Size (B5)
Copy Counter -
7-101*
5
Paper Size (DLT)
Copy Counter -
6
Paper Size (LG)
Copy Counter -
7
Paper Size (LT)
Copy Counter -
8
Paper Size (HLT)
Copy Counter -
9
Paper Size (Others)
Total Scan Counter
7-201*
Copy Counter -
7-204*
1
Paper Tray (1st)
Function
Selects the range for which binding holes in
originals are ignored.
If set at "0", this function is disabled.
An original jam may occur when an original
with binding holes is fed, because these
holes are detected by the sensors. Use this
SP to avoid this problem. For example,
when this value is set to "12 mm", this
machine ignores binding holes within 12 mm
of the trailing edge of the original.
Displays the total operation time (total drum
rotation time).
Displays the total number of scanned
originals (all modes).
Displays the total number of scanned
originals (copy mode only).
Displays the total number of scanned
originals (fax mode only).
Displays the total number of prints (all
modes).
Displays the total number of prints (copier
mode).
Displays the total number of prints (fax
mode).
Displays the total number of prints (printer
mode).
This SP mode is effective only when the
CSS board is installed.
Do not change the value.
Displays the total number of copies by paper
size.
Displays the total number of scanned
originals.
Displays the total number of copies fed from
each paper feed station.
4-52
20 September 1999
Settings
0 ~ 20
1 mm/step
12 mm
Advertisement
Table of Contents
