Table of Contents
Advertisement
IMAGE FUSING AND PAPER EXIT
2.10.6 FUSING TEMPERATURE CONTROL
Temperature Control
When the main power switch is turned on, the CPU turns on the fusing lamp to
maintain the fusing temperature of 180°C for the first job, or for the first 11
consecutive pages of printing. After that, the machine maintains the fusing
temperature at 170°C.
Note that the fusing temperature is higher if the user uses special paper in the 2
tray or thick paper mode from the bypass tray (see Paper Feed – Special Paper).
To prevent each end of the hot roller temperature from becoming too high, the
machine lowers the fusing temperature to 155°C when it detects that paper which
is less than 216 mm width is consecutively fed.
º C
2 0 0
1 8 0
1 7 0
1 5 5
1 0 0
5 0
P o w e r O n
2-74
20 September 1999
Idling Enabled
1 job or 11 pages
A267D511.WMF
nd
Advertisement
Table of Contents
