Table of Contents
Advertisement
20 September 1999
[D]
4. Install the stepped screw [A].
5. Install the shift tray unit [B], as shown.
NOTE: 1) Set the shift tray on the stepped screw.
2) The shift tray must be installed under the paper guide [C] installed in
step 3.
6. Connect the cable [D] to the copier.
7. Turn on the main power switch. Then select the shift tray using the UP mode
"2. Copier – 3. Input/Output – 6. Sort – Shift Sort".
8. Check the shift tray operation.
B313I103.WMF
3-27
SHIFT TRAY
[C]
[B]
[A]
Advertisement
Table of Contents
