Table of Contents
Advertisement
20 September 1999
6.1.3 LENS BLOCK ASSEMBLY
1. Remove the exposure glass. (See Scanner Exterior/Exposure Glass.)
2. Remove the right cover [A]. (See Scanner Exterior/Exposure Glass.)
3. Remove the lens cover [B] (4 screws).
4. Replace the lens block assembly [C] (5 screws, 1 connector).
NOTE: Do not remove the screws which are locked with white paint.
5. Reassemble the machine and do the scanner and printer copy adjustments.
(See Copy Adjustments.)
[B]
[A]
A267R003.WMF
6-3
SCANNER UNIT
[C]
A267R006.WMF
Advertisement
Table of Contents
