Table of Contents
Advertisement
SERVICE PROGRAM MODE
Mode No.
Class
Class
1 and 2
3
Display Language
Group
5-807*
Display Language
5-808*
mm/inch Selection
5-809*
SC Code Reset
5-810
Serial Number Input
5-811
Service Telephone
Number (Telephone)
1
Service Telephone
5-812*
Number (Facsimile)
2
CSS Function
5-816*
Function
This SP is effective only for the European
version.
Selects the display language group.
See "Display language" for details.
The actual display language can be selected
using SP5-808.
Selects the display language.
See "Display language" for details.
For the European version, the display
languages are divided into the language
groups of SP5-807.
Selects whether mm or inches are used in
the display.
Resets all level A service call conditions,
such as fusing errors.
After selecting "1", press the "Original Type"
key and the 7 key at the same time to reset
the SC codes.
If the reset was successful, the beeper will
sound 5 times. If it failed, the beeper will
sound only twice.
After performing this SP mode, turn the
machine's main switch off and on.
See "Troubleshooting - Service Call
Conditions" for how to use this mode.
Use to input the machine serial number.
(This is normally done at the factory.)
This serial number will be printed on the
SMC report. See the "Serial Number Input"
section for details.
Use this to input the telephone number of
the service representative (this is displayed
when a service call condition occurs).
Press the ó key if you need to input a
pause (–). Press the E (Clear/Stop) key to
delete the telephone number.
Use this to input the fax number which will
be printed on the user counter report.
Press the ó key if you need to input a
pause (–). Press the E (Clear/Stop) key to
delete the telephone number.
This SP is for Japan only. Do not change
the value.
4-46
20 September 1999
Settings
0: Standard
1: Option 1
2: Option 2
Eur./Asia
model
0: mm
1: inch
American
model
0: inch
1: mm
0: No
1: Yes
0: No
1: Yes
Advertisement
Table of Contents
