Datavideo TVS-1000A Instruction Manual page 29

VIRTUALSET maker gives the user the capability to manipulate the layer orientation. Once the
logo is imported, you will see that the controllers in pane 3 are enabled. The example below
illustrates how you can zoom, rotate and position a "datavideo" logo using the five controllers
outlined as follows. The goal is to pave the ground with datavideo logo.
Position Knob
The logo can be flipped along the x-axis.
Zoom Slide Bar
29
X Knob Y Knob
Knob for rotation
along x-axis
Z Knob