Datavideo TVS-1000A Instruction Manual page 39

recommended to be used in DSK as they would completely cover the broadcast image with their
contents.
There are two DSK keys available for the user. Follow the following procedure to display DSK on
the Program view:
• Switch on one of the DSK buttons;
• DSK button is illuminated in green;
• Select the source from the list below;
• The text is ready to be broadcasted;
• The text preview is shown in PREVIEW;
• The Placement button can optionally be used for changing the size or position of the text
on the Preview screen (Note: change of the text position is impossible if the text is
already on air);
• The text can be put on air gradually (using the Fade button) or abruptly (using the Cut
button) and disappears from the Preview Screen;
• The operation of the Fade and Cut buttons is independent of the Production Switcher
TAKE button;
• If the text is on air, the colour of the DSK button changes to red;
• To remove the text from the air, click on the Fade or Cut button once again;
• When the text is taken off air, the DSK button colour returns to green and the text will
now appear in PREVIEW screen again.
Text 1

Text 2

Media 1

Media 2

Still 1

Still 2

Camera

To configure position and size of the downstream key, click on the placement button to open the
window shown below.
After the logo to be placed on the program view is properly configured, the next step is to place
the logo on the program view. Click on CUT/Fade buttons to switch the key between Preview and
Program screens and the button will turn red. The two downstream keys are designed in such a
way that the user is allowed to simultaneously place two downstream keys on the program view.
Joystick: Logo positioning

Center Roller: Logo scaling


Adjustment Knob: Logo rotation
(Still Text and Picture only)
39