Simple - Datavideo TVS-1000A Instruction Manual

Select "Advanced" and click on to open a command selection window shown below.
Select a function, for example, "DSK: Set Source #1" as shown in the diagram below and then set
the corresponding parameters. Click on again to select the next function until all desired
functions are selected.
After all the desired functions are selected, click on the next key tab and repeat the above until
all keys are assigned the functions that you desire.

11.1.2 Simple

If the user's selection is "Simple" Mode, a user interface will appear as shown in the diagram
below. On the interface, the user is only given the Graphics Overlay function (Media Stream) to
perform simple customization of the function key. After the function key is customized, pressing
67