Table of Contents
Advertisement
2.5
TVS-1000A AUX Card
2.5.1 Introduction
TVS Virtu AUX Card is designed primarily for powerpoint file input via HDMI port as well as for
other applications such as media player or camera input. TVS AUX card can also be used in TVS-
1000A.
TVS-1000A Virtu HDMI Card and Virtu AUX Card Mapping Table
Card Type
Virtu HDMI
Table 1: TVS-1000A Virtu HDMI Card and Virtu AUX Card Mapping Table
Above table points out Virtu HDMI card H/W ver 1.0 & 1.2 cannot be workable with Virtu AUX
card. Only Virtu HDMI card H/W version above 1.3 can work with Virtu AUX card.
2.5.2 Installation
There are two models of motherboard used for the TVS-1000A PC System: ASUS H87-PRO (white
PCIe slot) and ASUS H97-PRO (black PCIe slot).
ASUS H87-PRO Motherboard
1. Remove Wi-Fi card.
2. Insert AUX card in the Wi-Fi card slot.
3. For TVS-VIRTU HDMI Card Version 1.4, use the cable
shown to the right to connect between TVS Virtu AUX card and TVS Virtu HDMI card.
3. Push the PCB with the 2.5" HDD mounted back
into the HDD enclosure.
4. Tighten the two screws (removed earlier) of the
rear cover of the removable 2.5" HDD enclosure.
5. Push the removable 2.5" HDD enclosure into
the front slot of the TVS-1000A system and move
the locking lever from right to left.
H/W
Workable w/
Version
AUX Card
1.0
X
1.2
X
1.3
∆
1.4
O
11
Remark
HDMI Ver 1.0 H/W limited.
HDMI Ver 1.2 H/W limited.
Functional but with warning
messages
Advertisement
Table of Contents
