Chapter 3: Call Operations; Making A Call; Answering A Call - Avaya J100 Manual

Chapter 3: Call operations

Making a call

About this task
Use this procedure to make a call using the expansion module lines. An outgoing call is indicated
with the outgoing call icon. The LED integrated in the line buttons are synchronized with the LED's
on the phone (the green LED combined with the red LED).
Procedure
1. Lift the handset and press the line button corresponding to the extension number to which
you want to call.
2. (Optional) Press the line button without lifting the handset to make a call using the
speakerphone.
3. Press End call to end a call.

Answering a call

About this task
Use this procedure to answer an incoming call using the expansion module line buttons. An
incoming call is indicated with the incoming call icon and the blinking green LED.
Procedure
Do one of the following:
• Press the flashing line button on Avaya J100 Expansion Module to activate the default audio
device and answer the call.
• Pick up the handset.
When you answer the call, the incoming call icon changes, and the phone screen displays the call.
Note:
When the phone is locked, Avaya J100 Expansion Module lines will not be used. However,
you can answer an incoming call using the expansion module line buttons.
January 2024 Using Avaya J100 Expansion Module for SIP
Comments on this document? infodev@avaya.com
13