Eneo IN Series Full Manual page 48

Network
Basic
No. Item
IP Address
1
Configuration
IPv6 Address
2
Configuration
3 DNS Configuration
Host Name
4
Configuration
5 Services
6 Save/Reset
48
Description
Obtain IP address via DHCP
Dynamic Host Configuration Protocol (DHCP) is a protocol that lets network administrators centrally manage and
automate the assignment of IP addresses on a network. DHCP is enabled by default. Although a DHCP server is mostly
used to set an IP address dynamically, it is also possible to use it to set a static, known IP address for a particular MAC
address. To obtain IP address via DHCP, check the radio button.
Use the following IP address
To use a static IP address for the network camera, check the radio button and then make the following settings:
• IP address: Specify a unique IP address for your network camera.
• Subnet mask: Specify the mask for the subnet the network camera is located on.
• Default router: Specify the IP address of the default router (gateway) used for connecting devices attached to different
networks and network segments.
Check the Enable IPv6 box to enable IPv6. Other settings for IPv6 are configured in the network router.
DNS (Domain Name Service) provides the translation of host names to IP addresses on your network. Check the radio
button to obtain DNS server via DHCP or set the DNS server.
Obtain DNS Server via DHCP
Automatically use the DNS server settings provided by the DHCP server.
Use the following DNS server address
To enter the desired DNS server by specifying the following:
• DNS servers: Enter the IP addresses of the primary and secondary DNS servers.
Host Name
Enter the host name to be used as device information in the client software or Smart Manager.
HTTP port
Enter a port to receive a service through the HTTP.
Default port number is "80".
HTTPS port
Enter a port to receive a service through the HTTPS.
Default port number is "443".
RTSP port
Enter a port to receive a service through the RTSP.
Default port number is "554".
When the settings are complete, click Save button to save the settings, or click Reset button to clear all of the information
you entered without saving it.