Eneo IN Series Full Manual page 39

Record
When the network camera detects an event, it can record the video stream onto the Micro SD Memory
(not supplied) or NAS (Network Attached Device) as a storage device. Check the Enable Record box to
enable the service.
No. Item Description
Overwrite
Click checkbox to overwrite the storage device; Continuous Record is available when not using an SD card.
Stream Type
You can select Stream 1, Stream 3, or Stream 4.
• Stream1, 3, 4: H.264 data
Pre-event
1 Record Setting Enter pre-event time value for the storage device pre-recording.
Post-event
Enter post-event time value for the storage device pre-recording.
Audio Record
Check the box if you want to record audio with video.
You can set the weekly recording schedule for each day. Drag or click area by a box unit at first. Clicking the block toggles the
2 Record Schedule
recording between on and off. Click the All Select button to set a schedule for the entire week or a whole day, respectively.
3 Device Setting SD: Mounted SD card.
4 Format Click the Format button to format SD card.
5 Device Remove Click the Device Remove button before detaching SD card for data safety in the SD card.
6 Device Information Show current SD card information.
Stream2 MJPEG data cannot be recorded.
EN
39