Eneo IN Series Full Manual page 27

Alarm In
This camera provides 1 Alarm In port and user can set the port. The Port can be given as Normally Open
or Normally Close state, and its Normal state can be configured. In order to use the alarm port, check the
Enable alarm port 1 first.
No. Item Description
Type
Choose the type of alarm to use from the drop-down list, NO (Normally Open) or NC (Normally Closed).
1 Alarm In Port 1 Setting
Dwell Time
Set the dwell time an event lasts from the point of detection of an alarm input.
When the settings are complete, click Save button to save the settings, or click Reset button to clear all of the information
2 Save/Reset
you entered without saving it.
EN
27