Eneo IN Series Full Manual page 34

No. Item
2 How to set up
Situation Default set image
Scene with
swaying trees
This scene involves many unwanted movements
from the tree. These movements can cause
unwanted objects to be detected during image
No. Item
1 Exclusive Area
2 How to set up
3 Save/Reset
34
Description
Intrusion:
1. Click the None menu to change into Intrusion.
2. Enter the Rule Name. Intrusion occurs when an object enters, appears or exits in/from set area.
3. Enable the on / off toggle switch to on and set the Intrusion area In Video Preview. The Intrusion area is displayed as a
yellow cell.
Loitering:
1. Click the None menu to change into Loitering.
2. Enter the Rule Name. Loitering generates an event if an object enters a set area and walks or stays for more than the set time.
3. Enable the on / off toggle switch to on and set the Loitering area in Video Preview. The Loitering area is displayed as a
purple cell.
Human:
1. Click the None menu to change into Human.
2. Enter the Rule Name. Human
Conditions for distinguishing human:
• The object must be 10-20% of the screen size.
• Head and shoulders should be visible and moving.
The camera may not be able to distinguish human in the following situations:
• A person who is sitting, crawling, or lying.
• Shooting vertically from the ceiling.
• When a head is unseen
• A person carrying a big baggage
• A person riding a bicycle
• People moving closer together
• Shown less than a second
analysis.
Description
Set the area to disable Object detection By not handling unnecessary areas, users can reduce false alarms and CPU usage.
Only Object-based events are not generated. Motion and Tampering runs irrespective of Exclusive Area.
Enable the on / off toggle switch to on and set the Exclusive Area in Video Preview. The Exclusive Area is displayed as red cells.
Video Control:
Users can make settings for optimal image analysis.
Click the Relearn Background button to re-learn the current image as background.
Use the Scene type menu to select the place where the camera is installed.
Use the View mode menu to select the angle at which the camera is installed.
View mode
Overhead is generally suitable for counting or detecting a moving direction.
Angle is suitable for detecting intrusions.
Horizontal should only be used for home security.
Proper camera installation
Installation height: 2.5m ~ 3.0m
Installation type: Tilt about 30 degrees horizontally and face downward.
Object: The object must not be within 3 meters of the camera.
When the settings are complete, click Save button to save the settings, or click Reset button to clear all of the information
you entered without saving it.
Recommended
Modified set image
settings
Reduce the
sensitivity to avoid
tree movement.
As an alternative,
users can set the
area around the
tree to Exclusive
This setting avoids the detection of tree
Area.
movement during the image analysis.