Eneo IN Series Full Manual page 33

Situation Default set image
Two objects are
detected as one
In this scene, two objects are detected as one.
This is usually due to the maximum size of
the object that is not set correctly. Reduce the
maximum size of the object.
One object is
detected as two
In this scene, one object is detected as two
objects. Usually this is because the minimum
and maximum sizes are set incorrectly. Increase
the minimum and maximum size of the object.
Some scenes contain large amounts of noise, which
High amount of can have an undesirable effect on the image analysis
noise in image because unwanted objects are detected in the image
No. Item Description
Set VA Event.
Select Event in the Select box (default: None). When Event is selected, a menu for setting Rule Name and Event will be
1 Detection Rule displayed. Users can set Event in Video Preview with on/off toggle switch.
Line Detector:
1. Click the None menu to change into Line Detector.
2. Enter the Rule Name and select the Line Event type from the Counter menu. The Detector will generate an event when
an object passes over the set line. Counter sets the direction and generates an event when an object moves in the set
direction and increases the count. To reset the count, click the Reset button.
3. Set direction of line detection in Direction menu.
4. Enable the on / off toggle switch to on and set the line area in Video Preview
Tampering:
1. Click the None menu to change into Tampering.
2. Enter the Rule Name and set the Dwell time. Tampering generates an event if there is a scene change. Users can adjust
2 How to set up the tampering sensitivity in the Sensitivity menu.
3. In the Light Change menu, users can include lighting on / off as a tampering event. Users can adjust the sensitivity of
Light Change in the Light Sensitivity menu.
Intelligent Motion:
1. Click the None menu to change into Intelligent Motion.
2. Enter the Rule Name and set the Dwell time. Intelligent Motion generates an event when motion is detected in the set
area. Users can adjust the sensitivity of Intelligent Motion in the Sensitivity menu.
3. Enable the on / off toggle switch to on and set the Intelligent Motion area in Video Preview. The Intelligent Motion area
is displayed as a blue cell.
or unwanted events occur.
The number of Detection Rule differs depending on License Type. (Standard Type: 3 Advanced Type: 8)
When Intelligent Motion is enabled, the existing Motion Detection is disabled.
Recommended
Modified set image
settings
Generally, when
setting the
minimum and
maximum sizes,
By adjusting the maximum size, two people are
the average size
should be set to
the minimum
size of the object,
half the width
and height of the
object, and the
maximum size of
the object should
be about 130%
of the width and
height of the
average object.
Increasing the minimum and maximum sizes
will ensure that objects are accurately detected
To minimize the
noise, reducing the Users can ignore the noise in the image and still
sensitivity will only
detect visible objects.
detected as separate objects.
as one.
detect the object in the scene.
EN
33