Eneo IN Series Full Manual page 45

IP Filtering
When the IP address filter is enabled, addresses added to the list are set as allowed or denied addresses.
All other IP addresses not in this list will then be allowed or denied access accordingly, that is, if the
addresses in the list are allowed, then all others are denied access, and vice versa. Also see the online
help for more information.
No. Item Description
Enable IP address Checking the box enables the IP address filtering function.
1
filtering Up to 256 IP address entries may be specified (a single entry can contain multiple IP addresses)
2 Add Click the button to add new filtered addresses.
When the settings are complete, click Save button to save the settings, or click Reset button to clear all of the information
3 Save/Reset
you entered without saving it.
NOTE: Users from IP addresses that will be allowed must also be registered with the appropriate access rights. This is done
from Setup > System > Security > Users.
EN
45